© SHAOXING FUJI Elevator Co.,Ltd. All Rights Reserved.
PUBLISH TIME: 2021-04-16
The primary problem of MRL elevators is how to arrange key components such as the car, counterweight, main engine, control cabinet, and speed limiter in the general elevator shaft without a machine room. If the machine room is cancelled and the cross-sectional area of ?the hoistway is increased or the top height of the hoistway is increased to solve this problem, it will not be worth the loss. The main way to solve the problem of the layout of the machine room hoistway is to skillfully use the hoistway space, develop special elevator components and develop new driving methods.
The common hoistway layout forms of MRL elevators are as follows:
1. Top-mounted main unit: This scheme adopts a specially designed and manufactured flat disc main unit so that it can be placed between the top car of the hoistway and the wall of the hoistway, and the control cabinet is integrated with the top floor door. Its main advantage is that the main engine and speed limiter are the same as the elevator with machine room under the same stress conditions, and the control cabinet is easy to debug and maintain; its main disadvantage is that the rated load, rated speed and maximum lifting height of the elevator are restricted by the external dimensions of the main engine, and the emergency disk The operation of the car is complicated and difficult.
2. Bottom-mounted main engine: This scheme is to place the main engine in the pit, and hang the control cabinet between the car and the wall of the shaft in the pit. Its biggest advantage is that increasing the elevator's rated load, rated speed and maximum lifting height is not limited by the external dimensions of the main engine, and the emergency cranking operation is convenient and easy; its main disadvantage is that the main engine and the speed limiter are different from ordinary elevators due to the stress conditions , So we must improve the design.
3. The host is placed on the car: This scheme places the host on the top of the car and the control cabinet on the side of the car. This arrangement has a larger number of accompanying cables.
4. The host and control cabinet are placed in the opening space on the side wall of the hoistway: this scheme is to place the host and control cabinet in the reserved opening on the side wall of the hoistway on the top floor. Its biggest advantage is that it can increase the elevator's rated load, rated speed and maximum lifting height. It can be equipped with the main engine and speed limiter used in ordinary elevators. It is also more convenient to install and maintain and emergency cranking operations; its main disadvantage is that it needs Appropriately increase the thickness of the side wall of the hoistway reserved for openings on the top layer, and an overhaul door should be installed outside the opening of the hoistway wall.
15 Apr, 2021
The features of MRL elevators are as follows:1. The main engine, drive cabinet and control cabinet of MRL elevators are installed on the upper part of the hoistway, and no special machine room is required. Compared with traditional elevators, it has great advantages in appearance.
15 Apr, 2021
What are the main components of MRL elevators?
15 Apr, 2021
MRL elevators refer to elevators that do not require a building to provide a closed dedicated machine room for installing elevator drive hosts, control cabinets, speed limiters and other equipment. MRL elevators is not a simple partial improvement of the traditional elevators in the past, but a major change in elevator technology.
14 Apr, 2021
Industry data shows that in the first half of 2020, the growth rate of the total number of elevators in my country exceeded 15%, and the proportion of shipments in the second half of the year compared with orders decreased, but the annual growth rate of production and sales remained at about 15%, compared with the previous year.